Despre rol
Locaţia
Sweden
Oestergoetlands laen
Finspang
Companie
Siemens Energy AB
Organizație
Gas Services
Unitate operațională
Distributed
Normă întreagă/normă parțială
Cu normă completă
Nivel de experiență
Student (înainte de absolvire)
Experimental master thesis project on heat transfer in the R&D Fluid Dynamic Lab
A Snapshot of Your Day
You will be part of the Fluid Dynamic Lab team as a Master Student. We are offering a position that will experimentally investigate the effect of additively manufactured (AM) induced roughness on the heat transfer and pressure losses. The experimental rig and method were developed in-house and referred to as the quasi Steady State Heat Transfer method (qSSHT).
The project is performed at our labs, and it is 20 weeks long with start in January or February.
How You’ll Make an Impact
The master thesis project is well structured, and you will have a well experienced and competent supervisor. The project plan usually follows the path where you will be responsible for:
- Literature review
- Test rig preparation for testing
- Perform testing
- Analysis of test results
- Apply changes on the test rig, test procedure or analysis to improve the results
- Final report/presentation writing.
During the thesis you will acquire improved skills in dimensional analysis, data acquisition and mass flow/pressure/temperature measurements. Basic knowledge in additive manufacturing will be obtained. An assigned experienced supervisor will support you during the whole period. The goal of each of our Diploma Thesis’ is to create a work result that it might be worth publication and some examples of previous student projects from the lab can be found in the Journal of Turbomachinery, ASME Turbo Expo and International Journal of Heat and Mass Transfer (TURBO-14-1171, GT2014-25619, GT2015-42475, GT2017-64143, GT2018-75019, DOI:10.1016/j.ijheatmasstransfer.2024.125532).
What You Bring
Your profile should show:
- Courses on:
- Gas fluid dynamics
- Dimensional similarity
- Numerical methods
- Knowledge in Matlab/Python
- Fluency in English language is required both in speech and writing
- It is appreciated if you have had laboratory testing experience
About the Team
The Measurement and Component Testing team is composed of highly experienced and knowledgeable test technology engineers and measurement technology engineers. We are around 20 team members, and we have for labs where we perform prototype design validation. We are part of the R&D department at Siemens Energy AB in Finspång and therefore our test measurements and methods are always evolving to meet new design validation demands and new technology developments. We are responsible for validation of both full engine prototypes as component prototyping.
Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet.
We can offer you employment benefits such as: reduction of working hours, advance vacation, health care allowance and an eventual possibility to a flexible working place.
Who is Siemens Energy?
At Siemens Energy, we are more than just an energy technology company. We meet the growing energy demand across 90+ countries while ensuring our climate is protected. With more than 99,000 dedicated employees, we not only generate electricity for over 16% of the global community, but we’re also using our technology to help protect people and the environment.
Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.
Find out how you can make a difference at Siemens Energy: https://www.siemens-energy.com/employeevideo
Our Commitment to Diversity
Lucky for us, we are not all the same. Through diversity, we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character – no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences.
Application
Don’t hesitate – apply via https://jobs.siemens-energy.com/en_US/jobs , id nr 265686 no later than 2024-11-20.
Ongoing selection is applied, the role might be filled before last application date.
For questions about the role, please contact the recruiting manager Alessio Bonaldo on alessio.bonaldo@siemens-energy.com.
For questions about the recruitment process please contact the responsible recruiter Ermina Imamovic on ermina.imamovic.ext@siemens-energy.com
We refrain from all contact with staffing and recruitment companies, or advertising brokers.
Location: Finspång
Trade Union Representatives:
Anders Häll, Unionen, +46122-887514
Simon Von Eckardstein, Sveriges Ingenjörer, +46122-842 24
Jan Lundgren, Ledarna, +46122-812 33
Mikael Malmgren, IF Metall, +4676-6958685
#LI-EI1